Metrics explained
Running dynamics: ground contact time, vertical oscillation and stride length
Running dynamics describe how you run, not just how fast. They help spot fatigue and technique changes, but there's no single "perfect" value.
Written by MoveVitals Editorial Collective
Community-authored educational content. Individual clinical review is identified only when a named review is actually recorded.
Editorial standards & corrections
Key takeaways
- Typical ranges are cadence of 155–190 spm, ground contact time of 200–300 ms, vertical oscillation of 6–13 cm and vertical ratio of 6–10 %, where lower is more efficient.
- Ground contact time and oscillation fall as speed rises, so compare running dynamics only at similar paces and terrain.
- Rising ground contact time late in a long run is a sign of fatigue, and persistent asymmetry such as 47/53 % can point to an old injury or weakness.
- Collect 2–3 weeks of baseline data before changing anything, and raise cadence in steps of about 5%, on easy runs first.
Chest straps (Garmin HRM-Pro), pods and newer watches (Apple Watch, COROS, Polar) measure running dynamics — metrics describing your running form.

The main metrics
| Metric | Typical range | What it describes |
|---|---|---|
| Cadence | 155–190 spm | Steps per minute |
| Ground contact time (GCT) | 200–300 ms | Time each foot stays on the ground |
| GCT balance | ~50/50 % | Left/right symmetry |
| Vertical oscillation | 6–13 cm | Up-and-down "bounce" of the torso |
| Vertical ratio | 6–10 % | Oscillation ÷ stride length (lower = more efficient) |
| Stride length | varies with speed | Distance per step |
| Running power | varies | Estimated mechanical power (Stryd, Garmin, COROS, Apple) |
What the numbers tell you
- GCT and oscillation fall as speed rises. Compare at similar paces.
- Rising GCT late in a long run is a sign of fatigue.
- Persistent asymmetry (e.g. 47/53 %) can point to an old injury or weakness — worth checking with a physio if it coincides with pain.
- Elite runners typically show short contact times and low vertical ratio, but copying the numbers doesn't create the fitness behind them.
Improving running form
- Strides: 4–6 × 20 s relaxed accelerations after easy runs.
- Drills: A-skips, B-skips, high knees — see warm-up routine.
- Strength and plyometrics for stiffness and power — see injury prevention for runners.
- Small cadence increases rather than consciously changing foot strike.
In MoveVitals
When the source provides them (Garmin, COROS, Apple Health), running dynamics are stored as streams with the activity.
Worked example
Illustrative scenario. Lena runs easy 10 km sessions at about 5:45/km. Her watch shows a cadence of 162 spm, ground contact time (GCT) around 285 ms and vertical oscillation near 10.5 cm. Rather than chasing a textbook number, she adds 5% to her cadence (to roughly 170 spm) with a metronome for 4 × 3 minutes inside two easy runs per week. After six weeks at the same pace, her GCT trends to about 270 ms and vertical ratio drops slightly. She also notices that late in long runs her GCT balance drifts from 50/50 to 51.5/48.5 — a cue to check fatigue or a niggle, not a diagnosis. The numbers here are illustrative; the useful habit is comparing herself to herself at a fixed pace.
Action steps
- Compare running dynamics only at similar paces and terrain — GCT and stride length change with speed.
- Collect 2–3 weeks of baseline data before changing anything.
- If you change cadence, do it in steps of about 5% and only on easy runs at first.
- Watch GCT balance late in long runs; a persistent shift of more than ~2% is a reason to check for fatigue or pain.
- Pair form work with strength and calf conditioning rather than forcing a new stride.
Related guides
- Cadence in running and cycling: is there an ideal number?
- Cadence drills for cyclists and runners
- Running pace: GPS accuracy, grade-adjusted pace and training paces
- Injury prevention for runners: load, strength and listening early
- Treadmill vs outdoor running: calibrating pace, incline and heart rate
FAQ
Should I aim for a specific GCT? No; use it to track your own changes over time.
Is running power better than pace? It responds instantly to hills and wind, but models differ between brands; don't mix them.
Do I need a chest strap or pod for running dynamics? Many watches estimate cadence from the wrist, but GCT, vertical oscillation and balance usually need a chest strap or foot/waist pod. Check your device's specs.
Can running dynamics predict injuries? Not reliably on their own. They are best used as one signal alongside pain, training load and how you feel.
What is vertical ratio? Vertical oscillation divided by stride length. Lower usually means less bounce per metre travelled, but compare only your own trend.
References
- Heiderscheit et al. (2011). Effects of Step Rate Manipulation on Joint Mechanics during Running. Medicine & Science in Sports & Exercise. https://doi.org/10.1249/mss.0b013e3181ebedf4
- Bent et al. (2020). Investigating sources of inaccuracy in wearable optical heart rate sensors. npj Digital Medicine. https://doi.org/10.1038/s41746-020-0226-6
For general information only. This is not medical advice — talk to a qualified professional about your health.
Keep reading
Metrics explained
VO2 max: what it means and how to improve it
4 min read
Metrics explained
Heart rate zones explained: how to set and use them
4 min read
Metrics explained
Normal heart rate variability (HRV) by age: RMSSD vs SDNN
6 min read
Metrics explained
Resting heart rate: normal ranges and what changes it
4 min read
Sports
Trail running with a watch: heart rate, climbs and pacing by effort
7 min read
Metrics explained
Maximum heart rate: formulas, field tests and why age-based estimates fail
4 min read

